Libratone Support

Follow

Classic Loop PD - If setup fails (Factory Reset + New Setup)

If setup fails, we can recommend a speaker factory reset and a new setup through speakers web interface.

FACTORY RESET

Perform a factory reset to clear all settings on your Libratone speaker.

  1. Press and hold the three buttons (PlayDirect, AirPlay and the Logo Button) simultaneously approx 3 sec until the status indicator pulses YELLOW. Then release buttons. Factory reset is only initiated correctly if ALL 3 buttons are pressed at exactly the same time. 
  2. After approx. 10 secs of YELLOW pulsing - the Status Indicator changes to WHITE breathing, and your Loop is factory reset and ready for setup

NEW SETUP

Set up the speaker using its web interface.

  1. Open Wi-Fi settings on your iPhone/iPad/Mac/PC and connect to the Libratone network (Libratone XXXXXX)
  2. Start your internet browser
  3. Enter 192.168.1.1 in the URL and press Enter
  4. Choose your home network and enter the password
  5. Press “Apply settings”
  6. Speaker will restart and pulse WHITE when connected

 

TOP 3 RECOMMENDATIONS IF SETUP STILL FAILS

  1. On Wi-Fi router: Use wireless standard 802.11g (2.4 GHz)
  2. On Wi-Fi router: Select WPA2 security + AES encryption  
  3. On Wi-Fi router: Avoid all special characters in name eg. (:-_/*!”?=.æøüé)

Click here to get the complete list of requirements and recommendations.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments