Libratone Support

Følg

Classic Loop BT - If setup fails (Factory Reset + New Setup)

FACTORY RESET

Press the three buttons (the two rear buttons on the back panel and the Logo Button) simultaneously. 

NOTE: Factory reset will only be started if the buttons are pressed exactly at the same time.

Keep the pressure for approx. 3 secs until the Logo Button LED starts blinking WHITE or BLUE.

After approx. 30 seconds the LED will change to WHITE BLINK-PULSE-BLINK SEQUENCE, and your speaker is now factory reset.

 

SETUP

Mac computer

  1. On your Mac, open Wi-Fi
  2. Select your speaker in "New AirPlay speaker"
  3. Check that Network is your preferred network and press "Next"
  4. You will hear an audio cue when setup is done
  5. Press "Done"
  6. Your speaker is now connected to your Wi-Fi and ready to be played

iOS (iPhone, iPad)

  1. On your iOS device, open "Settings" + "Wi-Fi"
  2. In "Set up new airplay speaker” select your speaker 
  3. Check that Network is your preferred network and press "Next"
  4. You will hear an audio cue when setup is done
  5. Press "Done"
  6. Your speaker is now connected to your Wi-Fi and ready to be played 

Android 

  1. On your Android device, open "Settings" + "Wi-Fi"
  2. Select your speaker 
  3. Open a web browser and enter 192.168.1.1
  4. Press the menu button up on the right hand side
  5. Select "Setup"
  6. Select "Wi-Fi" Network
  7. Enter "Wi-Fi" Password and press "Apply settings"
  8. Your speaker is now connected to your Wi-Fi and ready to be played 

 

TOP 3 RECOMMENDATIONS IF SETUP STILL FAILS

  1. On Wi-Fi router: Use wireless standard 802.11g (2.4 GHz)
  2. On Wi-Fi router: Select WPA2 security + AES encryption  
  3. On Wi-Fi router: Avoid all special characters in name eg. (:-_/*!”?=.æøüé)

Click here to get the complete list of requirements and recommendations.

Var denne artikel en hjælp?
0 ud af 0 fandt dette nyttigt
Har du flere spørgsmål? Send en anmodning

Kommentarer