Libratone Support

Follow

On-Ear - PLUS 1 setup via Libratone App

Use the PLUS 1 feature to form a Bluetooth SoundSpace group of two Q Adapt On-Ear headphones to send the same music to two different headphones simultaneously.

Read below how to create, play and dissolve a PLUS 1 SoundSpace group in Libratone App. 

 

Libratone App Drag-and-Drop (iPhone and iPad only)

  1. Connect to both headphones in the Bluetooth menu on your iPhone or iPad
  2. Start Libratone App
  3. Press and hold headphone 2 and drag it onto headphone 1 and let go
  4. When PLUS 1 is completed, an audio cue is presented and a SoundSpace Link will show up in SoundSpaces

Note:

  • If one of your headphones are not showing up in SoundSpaces, the headphone is most likely not Bluetooth connected with your smartphone. Read how to create a Bluetooth pairing here.
  • When your On-Ear is powered off it will automatically leave the SoundSpace Group.

 

Libratone App PLUS 1 button (Android only)

  1. Connect to one of your headphones in the Bluetooth menu on your smartphone
  2. Start Libratone App
  3. Tap one of your headphones in SoundSpaces
  4. Tap the PLUS 1 button placed at the bottom of the page
  5. Activate setup mode on your second pair of headphones and press the NEXT button
  6. Your second pair of headphones will show up on the next page - tap your second pair of headphones
  7. When PLUS 1 is completed, an audio cue is presented and a SoundSpace Link will show up in SoundSpaces

Note:

  • If your headphone doesn't show up in SoundSpaces, the headphone is most likely not Bluetooth connected with your smartphone. Read how to create a Bluetooth pairing here.
  • When your On-Ear is powered off it will automatically leave the SoundSpace Group. 

 

How to Play a PLUS 1 SoundSpace group

Simply start the music on your smartphone.

 

How to dissolve a PLUS 1 SoundSpace group

  1. Start Libratone App
  2. Tap on the SoundSpace LINK in SoundSpaces 
  3. Tap on GROUP SETTINGS
  4. Choose UNLINK 

Note: When headphones are powered off they will automatically leave the SoundSpace Group. 

 

If the PLUS 1 setup fails

This is our recommended procedure if setup fails:

  1. Perform a Factory Reset of both your headphones (Setup mode is automatically activated)
  2. Delete existing Bluetooth connections on your smartphone
  3. Perform a new PLUS 1 setup 
    1. iOS users (iPhone, iPad) > Libratone App Drag-and-drop
    2. Android users > Libratone App PLUS 1 button
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments