Libratone Support

Follow

ZIPP 2 / ZIPP MINI 2 - If setup fails

If setup fails we will recommend you to perform a FACTORY RESET and a new alternative SETUP.

FACTORY RESET

To perform a factory reset on your ZIPP2 or ZIPP2 Mini, hold the Nightingale and the power button on the back of your speaker simultaneously for 10 seconds while the speaker is ON.

The reset has initiated when the lights in the touch interface begin rotating. As soon as the reset has completed, the speaker will automatically enter setup mode.

Note: It is also possible to perform a factory reset by using the Libratone App.

SETUP

Mac computer

  1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface.
  2. On your Mac, open Wi-Fi
  3. Select your speaker (i.e. Libratone ZIPP2 300763) in "New AirPlay speaker"
  4. Check that Network is your preferred network and press "Next"
  5. You will hear an audio cue when setup is done
  6. Press "Done"
  7. Your speaker is now connected to your Wi-Fi and ready to be played

 iOS (iPhone, iPad)

  1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface. 
  2. On your iOS device, open "Settings" + "Wi-Fi"
  3. In "Set up new airplay speaker” select your speaker (ie. Libratone ZIPP2 300763)
  4. Check that Network is your preferred network and press "Next"
  5. You will hear an audio cue when setup is done
  6. Press "Done"
  7. Your speaker is now connected to your Wi-Fi and ready to be played

Android

  1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface.
  2. On your Android device, open "Settings" + "Wi-Fi"
  3. Select your speaker (ie. Libratone ZIPP2 300763)
  4. Open a web browser and enter 192.168.1.1
  5. Press the menu button up on the right-hand side
  6. Select "Setup"
  7. Select "Wi-Fi" Network
  8. Enter "Wi-Fi" Password and press "Apply settings"
  9. After the reboot, your speaker will be connected to your home Wi-Fi network ready to be played
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments