Libratone Support

Volgen

ONE/TOO - PLUS 1 via de Libratone App (NL)

Use the PLUS 1 feature to form a Bluetooth SoundSpace Group of two GO speakers.

Feel free to pair all combinations of ONE and TOO. Pair ONE-ONE, ONE-TOO or TOO-TOO. You can even let one speaker play right channel and the other play left channel. Your choice :)

How to create a PLUS 1 Bluetooth SoundSpace Group 

1. Setup via 'Drag-and-Drop' in Libratone App (iPhone and iPad)

  1. Connect to both speakers in the Bluetooth menu on your iPhone or iPad
  2. Start Libratone App
  3. Press and hold speaker 2 and drag it onto speaker 1 and let go
  4. When PLUS 1 is completed, an audio cue is presented and a SoundSpace LINK will show up in SoundSpaces

Note: If a speaker is not showing up in SoundSpaces, the speaker is most likely not connected correctly to your smartphone via Bluetooth. Read how to create a Bluetooth pairing here.

2. Use the 'PLUS 1' button in Libratone App (Android)

  1. Connect to one of your speakers in the Bluetooth menu on your Android device *)
  2. Start Libratone App
  3. Tap one of your Bluetooth connected speaker in SoundSpaces
  4. Tap the 'PLUS 1' button placed at the bottom of the next page
  5. Activate setup mode on your second speaker by pressing and hold the Nightingale for approx 5 seconds
  6. Press the 'NEXT' button and your second speaker will show up on the next page
  7. Tap your second speaker
  8. When PLUS 1 is completed, an audio cue is presented and a SoundSpace LINK will show up in SoundSpaces

*) Read how to create a Bluetooth pairing here

How to Play a PLUS 1 Bluetooth SoundSpace group

Select Bluetooth speaker 1 in the SoundSpace group in 'Settings' and 'Bluetooth' on your smartphone.

How to create a right / left setup

  1. Start Libratone App
  2. Tap on the SoundSpace LINK in SoundSpaces 
  3. Tap on 'GROUP SETTINGS' down on the page
  4. Tap on 'MODE' in the menu
  5. Choose between 'DUAL MODE', 'STEREO-1' OR 'STEREO-2'

How to dissolve a PLUS 1 SoundSpace group

  1. Start Libratone App
  2. Tap on the SoundSpace LINK in SoundSpaces 
  3. Tap on 'GROUP SETTINGS' down on the page
  4. Tap the UNLINK option to delete the PLUS 1 link between the 2 speakers
  5. When the PLUS 1 SoundSpace group is dissolved, you may have to reconnect to your speaker in the Bluetooth menu on your smartphone. 

If the PLUS 1 setup fails

This is our recommended procedure if setup fails:

  1. Perform a Factory Reset of both your speakers (Setup mode is automatically activated)
  2. Delete existing Bluetooth connections on your smartphone
  3. Perform a new PLUS 1 setup (Drag-and-drop or Button setup)
Was dit artikel nuttig?
Aantal gebruikers dat dit nuttig vond: 0 van 0
Hebt u meer vragen? Een aanvraag indienen

Opmerkingen