If setup fails we will recommend you to perform a FACTORY RESET and a new SETUP.

FACTORY RESET

To perform a factory reset on your Zipp or Zipp Mini, hold the Nightingale and the power button on the back of your speaker simultaneously for 10 seconds.

The reset has initiated when the lights in the touch interface begin rotating clockwise. As soon as the reset has completed, the speaker will automatically enter setup mode.

Note: It is also possible to perform a factory reset by using the Libratone App.

SETUP

Mac computer

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signalled by a side-by-side blinking signal on the Touch Interface. If you need to activate setup mode manually, click here
2. On your Mac, open Wi-Fi
3. Select your speaker (i.e. LibratoneZipp300763 300763) in "New AirPlay speaker"
4. Check that Network is your preferred network and press "Next"
5. You will hear an audio cue when setup is done
6. Press "Done"
7. Your speaker is now connected to your Wi-Fi and ready to be played

iOS (iPhone, iPad)

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signalled by a side-by-side blinking signal on the Touch Interface. If you need to activate setup mode manually, click here
2. On your iOS device, open "Settings" + "Wi-Fi"
3. In "Set up new airplay speaker” select your speaker (ie. LibratoneZipp300763 300763)
4. Check that Network is your preferred network and press "Next"
5. You will hear an audio cue when setup is done
6. Press "Done"
7. Your speaker is now connected to your Wi-Fi and ready to be played

Android

1. Ensure your speaker is in setup mode (activated out of the box). Setup mode is signaled by a side-by-side blinking signal on the Touch Interface. If you need to activate setup mode manually, click here
2. On your Android device, open "Settings" + "Wi-Fi"
3. Select your speaker (ie. LibratoneZipp300763 300763)
4. Open a web browser and enter 192.168.1.1
5. Press the menu button up on the right hand side
6. Select "Setup"
7. Select "Wi-Fi" Network
8. Enter "Wi-Fi" Password and press "Apply settings"
9. After reboot your speaker will be connected to your home Wi-Fi network ready to be played

TOP 3 RECOMMENDATIONS IF SETUP STILL FAILS

• On Wi-Fi router: Use wireless standard 802.11g (2.4 GHz)
• On Wi-Fi router: Select WPA2 security + AES encryption
• On Wi-Fi router: Avoid ALL special characters eg. (:-_/*!”?=.æøüé) in router name and password

Click here to get the complete list of requirements and recommendations.