Zipp cover change

Please follow the simple instructions below to install a new cover.

1. Push the silver circle in and twist to the right to remove the strap.
2. Unzip the cover at the base of the speaker.
3. Slide the cover up and off
4. Take your new cover (zipper side down) and slide over the top of the speaker (TIP: Do not pull the top of the cover all the way over the top of the speaker).
5. Gently pull the elastic cover away from the speaker and tuck it under the lip of the speaker top until it is fitted all the way around.
6. Line up the box of the zipper with the zipper pin and slide the pin in all the way (just like zipping a jacket). Zip the cover around the base of the speaker.
7. Replace the ZIPP handle circle by pushing it into the hole at the top of the speaker, and turn to the right until it locks into place.

Zipp Mini cover change

Please follow the simple instructions below to install a new cover.

1. Unzip the cover at the base of the speaker.
2. Slide the cover up and off
3. Take your new cover (zipper side down), insert the speaker strap into the slit on the cover, and pull the cover over the top of the speaker. (TIP: Do not pull the top of the cover all the way over the top of the speaker).
4. Gently pull the elastic cover away from the speaker and tuck it under the lip of the speaker top until it is fitted all the way around.
5. Pull the fabric around the metal ring that holds the strap handle.
7. Line up the box of the zipper with the zipper pin, and slide the pin in all the way (just like zipping a jacket). Zip the cover around the base of the speaker.

A Libratone cover change video is available here.